Wall Thick

EXTERNAL HALYARD FEATURES

• Ball - 14 gauge aluminum with a flush seam. Gold anodized furnished unless otherwise specified or choose clear anodized silver or finished to match shaft
• Truck - heavy duty external halyard, non-fouling, revolving type with 26 stainless steel ball bearings. Finished to match pole shaft
• Halyard - standard equipment includes one waterproof, mildew and U.V. resistant nylon halyard with wire center. Choose white, silver, black or brown to match shaft
• Cleat - heavy duty cast aluminum finished to match shaft. Secured with two stainless steel, flat-head, tamper-proff machine screws
• Collar - ornamental base or flash collar is spun aluminum with a diameter of at least 1 inch larger than the foundation sleeve.
• Foundation sleeve - 16 gauge corrugated steel tubing with lighting spike, base plate, support plate and centering wedges
• Finish - all of our steel flagpoles are mechanically cleaned and chemically etched to provide a smooth surfact. Two coats of two-part polyurethane primer are applied before application of two polyurethane finish coats. Specify custom or one of these standard colors: Aluminum (silver), Light Bronze, Medium Bronze, Dark Bronze, Black or White

INTERNAL HALYARD FEATURES

• Ball - 14 gauge aluminum with a flush seam. Gold anodized furnished unless otherwise specified or choose clear anodized silver or finished to match shaft
• Truck - heavy duty internal halyard revolving type with 26 stainless steel ball bearings. Finished to match pole shaft
• Halyard - standard equipment includes one stainless steel aircraft cable complete with proper size flag arrangement, shock spring, counterweight, beaded retainer ring and flag snaps.
• Winch - new, improved winch, mounted inside shaft, is operable only by a removable crank handle. Gearless and self-locking at any point, it eliminates the need for a separate brake. New direct-drive permits rapid raising and lowering of the flag with little effort. As stainless steel cable unwinds from the winch, it passes up through the shaft over truck sheave to the outside of the shaft where retainer sling provides a sliding anchor. Counterweight, heavily coated with neoprene, attached to retainer sling, allows halyard to be lowered for fastening or removing the flag. Then, the halyard is raised completely out of reach of vandals.
• Collar - ornamental base or flash collar is spun aluminum with a diameter of at least 1 inch larger than the foundation sleeve.
• Recommendation - flagpoles above 100' exposed height should be equipped with an internal halyard system to aid in raising and lowering the flags.