Description
Keep your favorite flags protected while they fly with our internal halyard flag poles! This 35 ft flag pole is made in America from aluminum and is available in four different finishes.
The satin finish is an excellent choice for general use and display. If your mounting location is near the coast or saltwater, we recommend getting an anodized finish instead for additional weather resistance. Our anodization color options include a clear coat, bronze, or black. Please note that anodization is a secondary process and will increase production time.
This 35’ flagpole has an impressively high wind rating of up to 150 mph, while flags are attached to the halyard. However, any flags should be taken down during extreme weather conditions, increasing the wind rating to 255 mph.
Each 35' Internal Halyard Flagpole w/ Collar Includes
- Concealed halyard revolving truck
- ⅜” stainless steel ball bearings
- Galvanized steel foundation sleeve
- 1/16” diameter stainless steel aircraft cable
- Beaded retainer ring
- Spun aluminum flash collar
- Neoprene coated counterweight
- One (1) flag arrangement (additional flag arrangements available for an added charge)
- Optional flagpole ornament (purchased separately)
Internal Halyard Flagpoles Explained
Our internal halyard flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes through the inside of the flagpole shaft over the truck sheave to the outside, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene and attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised entirely out of reach, helping prevent tampering.
The winch is gearless and self-locking at any point, eliminating the need for a separate brake. This direct-drive winch provides rapid raising or lowering of the flag with little effort. Our 35’ flag pole doesn’t require welding during installation or lubrication during maintenance.
How to Install this Flagpole & Necessary Materials
Exercise proper caution while installing this 35 ft flagpole. Check out the guide below for mounting instructions and the materials needed to complete the setup.
This flagpole set does not include certain necessary tools and supplies, such as concrete, sand, stone, caulking, and lock-tight.
Assess your chosen location for any obstacles, including trees, buildings, power lines, and underground pipes.
Call us if you need to customize this pole with a different truck, halyard, or cleat cover.
FREIGHT COSTS APPLY; CALL TO REQUEST A QUOTE. OTHERWISE, ONE WILL BE PROVIDED AFTER YOUR ORDER IS PLACED.